The D-Fend+ Water Trap is designed to protect the respiratory measurement system from viruses, water, mucus and bacterial contaminants, which can harm the gas module and affect measurement accuracy. The sampled gases are transported from the patient into the D-Fend+ water trap. The D-Fend+ water trap contains a GORE-TEX® membrane which

GE Healthcare will accept, for return from customer, items that are in new condition, unworn, una

Air flow sensor is a device used to monitor the air flow rate of a patient. Flow sensors measure the volume of gas dispensed from the O₂ and air channels during inhalation and exhalation. The relative proportion of gas dispensed from each channel is continuously adjusted to accurately control the percentage of O₂ delivered to the patie

The XDCR Neonatal Flow Sensor 0-30 L/Min is a sensor that is an optional accessory for the Engstrom Carestation and Engstrom Pro to measure proximal gas flow and volume. It also serves as feedback to the volume control in Engstrom. The sensor is exposed to inhaled and exhaled patient gases like oxygen, carbon dioxide and nitrogen. Its

The Exhalation Valve Assembly contains a diaphragm, a seal, an exhalation valve housing, expiratory flow sensor, an O-ring, a plunger, a spring and a water trap. It comes under the respiratory module. It vents the respiratory gases from the patient to the atmosphere at the expiration phase. The valve opens after an inspiration is compl

The Exhalation Valve Replaceable service kit is a specially designed part for use in anesthesia ventilation system and other medical applications as necessary. The exhalation valve assembly has a built-in flow transducer. The assembly consists of exhalation housing, seal exhalation pressure, seal flow transducer, retaining ring, water

The Cable - Neonatal Flow Sensor is a cable that is used in anesthesia and Engstrom machines. One end is circular snap type female connector made up of polyamide material and the other end is glass-filled nylon material connector with tin plating and steel shell. Both ends are connected by cable with 4 conductors tinned copper of 26 ga

• Spirometry kits, single use For humid conditions (2 m/7 ft)

GE Healthcare will accept, for return from customer, items that are in new condition, unworn, una

The Pedi-Lite+™ Spirometry Sensor is a specially designed part, for use in CARESCAPE™ respiratory modules, pulse oximeter and other medical equipment as applicable. The device accurately senses respiratory and ventilator parameters. The sensor, when placed at the vicinity of patient's airway provides continuous, reliable and accurate i

GE Healthcare will accept, for return from customer, items that are in new condition, unworn, una

Spirometry is one among a type of pulmonary function test. It helps to measure the volume of air and the speed of air flow from a patient’s breath. The data can be used to evaluate the patient's lung based on the inputs collected. The spirometry sensor is set up with one inlet measuring the pressure inside the spirometer tubing and the

GE Healthcare will accept, for return from customer, items that are in new condition, unworn, una

The Pediatric Sensor is used to take measurements along with GE monitors and the patient spirometry function. The Pedi-lite are used for patients with certain limited tidal volumes. Select the correct sensor type in the patient spirometer menu. Examine the lower tidal volume limit from the monitor manual and module, as the monitor does

GE Healthcare will accept, for return from customer, items that are in new condition, unworn, una